SWITCH CABINET 1
SWITCH CABINET 2
SWITCH CABINET 3
SWITCH CABINET 4
SWITCH CABINET 5 |
|
Examples of executed special switch cabinets:
SWITCH CABINET 1
• 3-door switch cabinet with 2 pieces at the front and rear usable swivelling frames
• Roof attachment for cable feed
• Suspended small housing
• Cabinet floor with built-in air/water heat exchanger and 2 fans
• Additional water cooler for machine cooling in an appropriate design
SWITCH CABINET 2
• Switch cabinet combination made of 3mm sheet steel according to
FORD USA standard
• Roof attachment and cable chamber at the top with removable lids
• Side control panel with diagonal surfaces and circumferential adapter frame
• SQUARE D lock on the doors
• Different paint on the inside and outside
SWITCH CABINET 3
• Multiple door switch cabinet with different compartments
• Folding lid with built-in air/water heat exchanger (2600 W)
• Side retractable top assembly plate
• Side retractable bottom assembly plate, usable on both faces
• Hydraulic/pneumatic section with swivelling plate bottom left links
SWITCH CABINET 4
• Switch cabinet combination comprised of several individual areas
• Side cable feed and cable chamber at the top with separate lids
• Attached, removable side wall and narrow revolving doors on the left
• All areas with side retractable assembly plates
• Per area in the base 1 air/water heat exchanger LWS 1600 (1600 W respectively)
SWITCH CABINET 5
• Double row switch cabinet combination with large top mounted box
• 2 partially installed air-conditioning units HX 2000 T (2000 W respectively)
on the double doors
• Attached, removable side walls and narrow revolving doors on the right
• Side retractable, reinforced assembly plates in all areas
• 200 mm base and cable feed from underneath |